Davicom DM9000E ISA to Ethernet MAC Controller with Integrated 10/100Mbps PHY

Davicom

Davicom DM9000E

Processor Interface, MII, PHY, ISA

SMT

25+

Taiwan, China

Network Interface Adapter, Surveillance Camera, Embedded System, Ethernet Hub, Ethernet Switch

PHY, MAC

DM9000 series

The DM9000 is a fully integrated and cost-effectivesingle chip Fast Ethernet MAC controller with ageneral processor interface, a 10/100M PHY and 4KDword SRAM. It is designed with low power and highperformance process that support 3.3V with 5Vtolerance.The DM9000 also provides a MII interface to connectHPNA device or other transceivers that support MIIinterface. The DM9000 supports 8-bit, 16-bit and32-bit uP interfaces to internal memory accesses fordifferent processors. The PHY of the DM9000 caninterface to the UTP3, 4, 5 in 10Base-T and UTP5 in100Base-TX. It is fully compliant with the IEEE 802.3u Spec.Its auto-negotiation function will automatically configure theDM9000 to take the maximum advantage of its abilities. TheDM9000 also supports IEEE 802.3x full- duplex flow control.This programming of the DM9000 is very simple, so usercan port the software drivers to any system easily.

100-pin LQFP

Supports processor interface: byte/word/dword of I/O command to internal memory data operation, Integrated 10/100M transceiver, Supports MII and reverses MII interface, Supports back pressure mode for half-duplex mode flow control, IEEE802.3x flow control for full-duplex mode, Supports wakeup frame, link status change and magic packet events for remote wake up, Integrated 4K dword SRAM, Supports automatically load vendor ID and product ID from EEPROM, Supports 4 GPIO pins, Optional EEPROM configuration, Very low power consumption mode: Power reduced mode (cable detection) Power down mode Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction, Compatible with 3.3V and 5.0V tolerant I/O, 100-pin LQFP with CMOS process